Huawei 5288 V3 V100R003 User Manual page 78

5288 V3 Server
User Guide
Step 3 Connect a network cable, a VGA cable, or USB devices as required, and connect power
cables.
Step 4 (Optional) Install the cable management arm (CMA).
1.
2.
3.
Step 5 (Optional) If a CMA is installed, the external cables connected to the server must be routed
into the CMA. See
Issue 26 (2018-11-19)
Slot left outer arm of the support lever between the protrusions of the left outer rail. See
step (1) in Figure 3-19.
Figure 3-19 Installing the CMA
Slot the right outer arm of the CMA between the protrusions of the right outer rail. See
step (2) in Figure 3-19.
Slot the right inner arm of the CMA between the protrusions of the right inner rail. See
step (3) in Figure 3-19.
Figure 3-20.
Copyright © Huawei Technologies Co., Ltd.
3 Installing and Removing the 5288 V3
68