Huawei 5288 V3 V100R003 User Manual page 114

5288 V3 Server
User Guide
9.
10. Choose Advanced > PXE Configuration and press Enter.
11. Select the network port to be configured, and press Enter.
12. Choose Enabled from the shortcut menu and press Enter to enable the PXE function for
13. Select the Security tab.
Issue 26 (2018-11-19)
Select boot options to be configured, and press + or - to change the boot sequence. Set
the first boot option to PXE.
The option at the top of the boot option list is the first boot option, and the one at the
bottom is the last boot option.
– To move a boot option up, press +.
– To move a boot option down, press -.
Enable the PXE function for a network port.
The PXE Configuration screen is displayed, as shown in
NOTE
The PXE Configuration screen displays four network ports, in which PXE1 is Enabled and other
network ports are Disabled by default.
Figure 5-10 PXE Configuration
the network port.
Set the BIOS password.
The Security screen is displayed, as shown in
Copyright © Huawei Technologies Co., Ltd.
5 Configuring the 5288 V3
Figure 5-10.
Figure 5-11.
104