Maintenance; Replace A Print-Head - Felix printers FELIX Pro 3 Touch Quick Start Manual

12 Maintenance

A 3D printer is a quite complex motion system and requires maintenance.
TIP: Check our YouTube channel to see instruction video's about maintenance.
https://www.youtube.com/user/FELIXprinters

12.1 Replace a print-head

Caution: There is a potential risk of burning, as the nozzle can reach temperatures of up to 275°
For cleaning or maintenance purposes, the hot-end can be easily removed from the FELIX Pro.
Please take the following steps:
1. Check if there is still filament loaded in the hot-end. If there is no filament loaded, then go to step 4. If
yes, from the display unit or PC interface select the correct extruder and heat it up.
2. Retract the filament from the hot-end.
3. Let it cool down.
4. Turn off the printer.
Quick Start Guide FELIX Pro 3 Touch
25 January 2019
24
Page