Table of Contents
Advertisement
Loading flexible filament.
It is recommended to load filament via the interface at the printer. Goto Control => Change filament =>
Choose the correct filament and/or temperature.
1.
Cut the end of the filament in a skew manner. The extruder gears might find it difficult to get grip onto
the first part of the flexible filament which is fed into the extruder.
2. Extrude filament until the first drip comes out. Then slowly extrude more piece by piece. Do not
extrude in a continuous feed at high speed as that will increase chances of buckling.
3. Optional: Lower the overall print speed. Via the display unit take the following steps after starting the
print. Press the rotary button. Then scroll down to Speed Mul. And lower it to 50%. Then by trial and
error increase the speed.
Quick Start Guide FELIX Pro 3 Touch
25 January 2019
23
Page
Advertisement
Table of Contents
