Panel Description; Front, Top, And Side Panels; Keypad - Icom IC-A16 Full Manual

2

PANEL DESCRIPTION

Front, top, and side panels

1
2
Microphone
3
4
1 ANTENNA CONNECTOR
Connect the supplied antenna. (p. 1)
2 PTT SWITCH [PTT]
Hold down to transmit, release to receive. (p. 7)
3 SQUELCH ADJUSTMENT KEYS [SQL∫]/[SQL√]
Push to adjust the squelch level.
4 UP/DOWN KEYS [∫]/[√]
z Push to change or select the frequency, Memory
channel, Set mode settings, and so on.
z While scanning, push to change the scanning
direction.
5 CLEAR/HOME KEY [CLR]/[HOME]
z Push to return to the VFO mode.
z Hold down for 2 seconds to reset the Set mode
settings to default.
6 MEMORY/MEMORY WRITE KEY [MR]/[MW]
z Push to enter the Memory Channel Selection
mode. (p. 7)
z Push [FUNC], and then push this key to enter the
Memory Write mode. (p. 9)
 7 HEADSET JACK
Connects a third party headset through the optional
headset adapter. (p. 13)
8 LOCK KEY [ ]
z Push to lock the keypad.
z Hold down for 2 seconds to unlock the keypad.
 9 VOLUME/POWER SWITCH [VOL]
z Rotate to turn the transceiver ON or OFF.
z Rotate to adjust the audio output level.
9
8
7
6
5

Keypad

Keypad
z Push to set the frequency, select a Memory
channel, and so on.
z Push [FUNC], and then push or hold down another
key within 3 seconds to use the secondary functions
listed below.
KEYS
Push [1]/[ANL]
Push [2]/[SCAN]
Push [3]/[GRP]
Push [4]/[WX-ALT]* Turn the Weather Alert
Push [5]/[DUP-W]* Enter the Duplex Frequency
Push [6]/[DUP]*
Push [7]/[WX]*
Push [8]/[BEEP]
Push [9]/[TAG]
Hold down
[ENT]/[SET] for 1
second
Push [0]/[121.5]
*For only the USA version.
4
FUNCTIONS
Turn the Automatic Noise
Limiter (ANL) function ON or
OFF.
Start a scan.
L Push [CLR] to stop a scan.
In the Memory mode, enter
the Memory Selection mode.
function ON or OFF.
Entry mode.
L Confirm the NAV band
frequency is selected.
Turn the Duplex function ON
or OFF.
L Confirm the NAV band
frequency is selected.
Enter the Weather Channel
Selection mode.
Turn the Key beep ON or OFF.
Tag or untag the selected
Memory channel or Weather
Channel*.
Enter the Set mode.
Select the emergency
frequency.