Attaching The Platform To The Carriage; Platform Attachment Checks - JLG LiftPod FS80 Operation, Safety, Service And Maintenance Manual

SECTION 3 - MACHINE OPERATION
4. Slide the carriage/mast assembly onto the mast stump.
Make sure it is properly aligned and fully engaged.
Never force it into position (see Figure 3-5.).
Fully Engaged
Figure 3-7. Attaching the platform to the carriage
5. Attach the platform to the carriage (see Figure 3-7.).
• Make sure the platform's mounting pins are
aligned with the holes in the carriage (A), then
drop slowly down to seat properly.
1001070451
3-6
(A)
(B)
Figure 3-8. Platform attachment checks
• Ensure the platform locator (B) is properly
engaged in the bottom of the carriage frame.
• Make sure the platform latch (C) is fully
engaged. CHECK: Try to lift the platform out,
if it does not release, then the platform has
engaged properly.
LIFTPOD by JLG
www.liftpod.com
(C)
1-877-254-3876
1-877-2-LIFTPOD