Table of Contents
Advertisement
SECTION 3 - MACHINE OPERATION
7. Place the powerpack (optional equipment) against the
platform uprights, closest to the mast, and slide it down
until it clicks, indicating it is fully seated (see Figure 3-
10.).
Figure 3-10. Powerpack positioned and latched into
NOTE: When reversing the procedure to disassemble the
machine, pull the powerpack release latch (see Figure 3-
17.) while lifting to disengage the powerpack from the
platform.
1001070451
3-8
place
8. Tool tray: (optional equipment)
Place on top rail of platform, and fasten the two clips
firmly around the rail (see Figure 2-9.).
THE WEIGHT OF OBJECTS CARRIED IN A PLATFORM ACCESSORY,
ALONG WITH PERSONNEL AND EQUIPMENT PLACED IN THE PLAT-
FORM MUST NOT EXCEED THE MAXIMUM RATED PLATFORM CAPAC-
ITY. SEE TABLE 5-4.
DO NOT PLACE ITEMS IN THE TOOL TRAY IN THE INDICATED AREA
WHEN MAST IS BELOW THE TOOL TRAY'S TOP SURFACE (SEE FIGURE
3-11.).
LIFTPOD by JLG
www.liftpod.com
1-877-254-3876
1-877-2-LIFTPOD
Advertisement
Table of Contents
