Table of Contents
Advertisement
SECTION 2 - PREPARATION AND INSPECTION
10
FRONT
6
8
Figure 2-3. Daily Walk-Around Inspection
(Sheet 2 of 2)
1001070451
2-6
7
11
9
REAR
5
5. Gearbox - check for any oil leaks, especially around
bottom shaft seal.
6. Swivel Castor Mechanism and Adjustable Feet -
Check for any debris stuck to or around wheels or
mechanism. Check adjustable feet for damage. Rubber
pads and tire must be in good order.
7. Rope Assembly - Check rope is not frayed or damaged
(Figure 2-4.). Ensure it is tensioned tightly and seated
properly around take-up drum (view via carriage inspec-
tion window - see Figure 6-2.). Ensure it is seated cor-
rectly over mast-cap (Figure 2-5.) and at anchor point at
back of mast (Figure 2-6.). Indications that rope needs
replacement include:
1. Frayed or fluffy rope (Figure 2-4.)
2. Braiding no longer visible
3. Sections of rope thinned down in diameter.
8. Manual Descent Crank - Ensure it is present and
securely attached (Figure 2-8.).
9. Powerpack and Control Console (optional) - Ensure it
is properly mounted and secured. Button, triggers and
switches not obscured or damaged; decals secure and
legible; emergency stop switch reset for operation; con-
trol markings legible. Battery is installed and secure.
LIFTPOD by JLG
www.liftpod.com
1-877-254-3876
1-877-2-LIFTPOD
Advertisement
Table of Contents
