Descending; Powerpack Emergency Stop/Shutdown Button; Emergency Stop Button Operation - JLG LiftPod FS80 Operation, Safety, Service And Maintenance Manual

Hide thumbs Also See for LiftPod FS80:

Table of Contents

SECTION 3 - MACHINE OPERATION

Descending

CRUSHING HAZARD - BE AWARE OF DESCENDING PLATFORM WHEN

LOWERING THE PLATFORM. KEEP HANDS OR FEET OFF THE MAST

ASSEMBLY AND FROM BENEATH PLATFORM.

On the cordless drill, move the direction selector to the "unscrew"

(anti-clockwise) direction. Push the cordless drill down to disen-

gage the driveshaft interlock and squeeze the trigger to descend.

If using the optional powerpack, move the direction selector to the

DOWN position. Hold the handle so the enable trigger is pressed

and squeeze the speed trigger.

To stop at anytime, simply release the speed trigger.

To exit the platform, ensure the platform is all the way down until it

touches-down on the base. This will engage the drive mecha-

nism's overdrive ratchet, making a ratcheting sound. This means

the platform has reached its lowest position and the trigger should

be released.

NOTE: Before transporting, maneuvering or disassembling

machine, ensure the platform is all the way down. The

carriage lock is engaged automatically when the platform

is fully lowered and all load is removed.

1001070451

3-16

If the platform stops responding to operator input at any time while

the platform is moving, use the emergency stop button to cut the

power to the motor.

Press down to activate

Emergency Stop

Figure 3-21. Emergency stop button operation

LIFTPOD by JLG

www.liftpod.com

Rotate clockwise

to release/reset

Emergency Stop

1-877-254-3876

1-877-2-LIFTPOD

Table of Contents