Processing The End Of Transmission Cables - Panasonic MEWNET-F Technical Manual

3.4.2 Processing the End of Transmission Cables

Be sure to use crimp terminals for processing the end of transmission cables.
If connecting the cables directly to the terminal blocks without using crimp terminals, contact failures may
easily occur and normal communication may not be performed.
- Use M3 terminal screws for the terminal of FP2 Multi-wire Link Unit/FP2 Remote I/O Slave Unit.
Use the crimp temrinals having the following shapes.- Fasten the terminals securely applying a
tightening torque of 0.5 to 0.6 N m.
Suitable crimp 1. Ring terminal
terminal 2. Insulated ring terminal
3. Fork terminal
Manufacturer
JST Mfg. Co., Ltd.
Example of suitable crimp terminal
Manufacturer
JST Mfg. Co., Ltd.
Shape Model name
Ring type 1.25-YS3A
Shape Model name
Fork type 2-MS3
3-9