Panasonic MEWNET-F Technical Manual page 81

How to register
Two types of registration of remote I/O maps are available.
Registration of the remote I/O map configured with automatic allocation
When the CPU at the master station is turned on and a remote I/O map has not been stored in the CPU,
the automatically allocated map (refer to the previous section) will be registered as well as the normal
I/O map (I/O allocation on the master station system).
[Procedure] 1. Select the system you want to register, and turn on the slave stations and then turn on
the master station. (I/O numbers will be allocated automatically.)
2. Register the I/O numbers.
- When using the FP programmer; execute "OP-52".
- When using teh FPWIN GR; execute "Remote allocation".
When using the FP programmer, do not confuse "OP-52 (I/O LAYOUT)" and "OP-51 (SYSTEM REG.
INT)".
Registering an I/O map created using arbitrary allocation
A remote I/O map is arbitrarily created and registered independently of the installed condition or the
normal I/O map.
[Procedure] Execute the [Remote I/O allocation] on the FPWIN GR.
* You cannot register an arbitrary remote I/O map with the FP programmer.
6-7