Fp3 Remote I/O Slave Unit (Afp3745) - Panasonic MEWNET-F Technical Manual

2.3.2 FP3 Remote I/O Slave Unit (AFP3745)

Functions of each part
(1)Operation monitor LEDs ......
(2)Station number selector switches..
2-10
Indicates communication status and operation mode.
Set the station number of the MEWNET-F.Point the arrow
to the number to be used. (Set tens place and ones place
separately.)
Setting range: 01 to 32
* When setting numbers exceeding the range, the setup
error occurs (ALARM LED flashes), and communication
becomes impossible.
* The settings will be accepted when the power turns on.