Panasonic MEWNET-F Technical Manual page 57

Installation method
- Be sure to remove or install units only when all power is off.
- Do not touch the terminals of connectors cirectly.It may cause contact failures or the damage to
elements due to static electricity/
FP3
1. Fit the unit tabs into the unit holes on teh backplane.
2. Push the unit in the direction of the arrow to plug it into the backplane.
3. After properly plugging the unit into the backplane, tighten the installing screw at the top and bottom.
Reference: For FP2/FP2SH, <FP2/FP2SH Hardware Manual ARCT1F320E>
4-5