Unit Types; Remote I/O System "Mewnet-F" Components - Panasonic MEWNET-F Technical Manual

1.3 Unit Types

1.3.1 Remote I/O System "MEWNET-F" Components

Name
FP2 Multi-wire
Link Unit
FP3 Remote I/O
Master Unit
FP2 Remote I/O
Slave Unit
FP3 Remote I/O
Slave Unit
FP I/O terminal
baord
[MIL connector
Note1)
type]
FP I/O terminal
board [Terminal
block type]
FP I/O Terminal
Unit
FP1 I/O Link Unit
FP0 I/O Link Unit
FP-M I/O link
board
Note1) Power supply cable (1 m in length) APL9511 x 1 pc is supplied.
Note2) PL Mark II expansion cable (8 cm in length) APL2510 x 1 pc is supplied.
Note3) FP1 expansion cable (7 cm in length) AFP1510 x 1 pc is supplied.
Note4) When using the editing software FPWIN GR, the number of occupied I/O points can be set to 0
(0SE).
Specifications
A master station is configured with the CPU unit of FP2,
FP2SH, and controlsslave stations.
A master station is configured with the CPU unit of FP3
FP10, and controlsslave stations.
This unit is used for decentralized allocation of I/O using
the FP2 system as a slave station. It is controlled by the
master unit.
This unit is used for decentralized allocation of I/O using
the FP3 system as a slave station. It is controlled by the
master unit.
12 V DC input/
0.2 A Tr output
24 V DC input/
0.2 A Tr output
24 V DC input/
0.2 A Tr output
24 V DC input/
2 A Ry. output
FP I/O
Terminal
Unit
Controlled as
(Basic)
a slave
station. Up to
32 points can
be added.
(Operating
voltage: 24 V
FP I/O
DC)
Terminal
Expansion
Note2)
Unit
Combined with FP1, and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
Note3)
FP10SH).
Combined with FP0 and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
FP10SH).
Combined with FP-M, and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
FP10SH).
16-point input, 16-point
output
16-point input, 16-point
output
16-point input, 16-point
output
16-point input, 8-point
output
8-point
Input unit input
24 V DC input
16-point
input
8-point
Output unit output
0.5 A Tr. output
16-point
output
8-point
Input unit input
24 V DC input
16-point
input
8-point
Output unit output
0.5 A Tr. output
16-point
output
Power supply voltage: 24 V
DC
Power supply voltage: 100 V
AC to 240 V AC
Power supply voltage: 24 V
DC
Power supply voltage: 12 V
DC
Power supply voltage: 24 V
DC
Model
I/O
No.
allocation
Note4)
16SE AFP2720
Note4)
16SE AFP3742
――― AFP2745
――― AFP3745
16X16Y AFP87445
16X16Y AFP87446
16X16Y AFP87444
16X16Y AFP87432
16X AFP87421
16X AFP87422
16Y AFP87423
16Y AFP87424
16X AFP87425
16X AFP87426
16Y AFP87427
16Y AFP87428
32X32Y AFP1732
32X32Y AFP1736
32X32Y AFP0732
32X32Y AFC1731
32X32Y AFC1732
1-9