Network Settings; Ipv4; Configuring Ipv4 Using The Phone Interface; Configuring Ipv4 Using The Web Interface - Xorcom UC912G User Manual

UC912G IP Phone

Network Settings

Xorcom IP phone support IPv4, IPv6. And IPv4&IPv6. They have three mode of Network: DHCP,
Static, and PPPoE. The default mode is DHCP, it will obtain IP address and other information
automatically.
If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address
manually.
When changing between DHCP, Static IP or PPPoE options, or changing the Static IP, the webpaget
will show a warning like this:

IPv4

If you set IP Mode to IPv4, the phone will use IPv4 address. IPv4 has three network modes: DHCP,
Static, and PPPoE

Configuring IPv4 using the phone interface

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IP
Port Mode
2. Press Left arrow or Right arrow key to change the IP Port Mode
3. Press OK or Save soft key to save the configuration

Configuring IPv4 using the web interface

1. Click Network→ Basic→ Internet Port
2. Select IPv4 for Internet Port
3. Click SaveSet to save the configuration
Copyright © 2019 Xorcom Ltd. All rights reserved Page 51 of 165