Table of Contents
Advertisement
UC912G IP Phone
Initialization
After your phone has been powered on, the system boots up and performs the following
steps:
Boot
The phone finishes the initialization process by loading the saved configuration. The phone
will display the following message on the LCD screen:
Initialization
After the boot sequence is completed, the phone will initialize in accordance with the saved
configuration, while displaying the following message on the screen:
Firmware Upgrade
The IP Phone will upgrade the firmware if new firmware is found on your server. During this
stage, the phone will display the following message on the screen:
Copyright © 2019 Xorcom Ltd.
All rights reserved
Page 30 of 165
Advertisement
Table of Contents
Need help?
Do you have a question about the UC912G and is the answer not in the manual?
Questions and answers