Table of Contents
Advertisement
UC912G IP Phone
Configuring Network using the web interface
1. Login to the web interface (refer to
Network→ Basic→ IPv4 setting
2. Select the desired network type: DHCP, Static or PPPoE
3. Enter the necessary information
4. Click the SaveSet and restart the phone
IPv6
If you set IP Mode to IPv6, phone will use IPv6 addressing. IPv6 has two network modes: DHCP,
Static
Configuring IPv6 using the phone interface
1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IP
Port Mode
Copyright © 2019 Xorcom Ltd.
Web Login
for details of the login process) and click
All rights reserved
Page 53 of 165
Advertisement
Table of Contents
Need help?
Do you have a question about the UC912G and is the answer not in the manual?
Questions and answers