Network Settings; Ipv4; Configuring Ipv4 Using The Phone Interface - Xorcom UC924 User Manual

UC924 IP Phone

Network Settings

Xorcom IP phone support IPv4, IPv6. And IPv4&IPv6. They have three mode of Network: DHCP,
Static, and PPPoE. The default mode is DHCP, it will obtain IP address and other information
automatically.
If your phone cannot contact a DHCP server for any reason, you need to configure a static IP address
manually.
When changing between DHCP, Static IP or PPPoE options, or changing the Static IP, the webpaget
will show a warning like this:

IPv4

If you set IP Mode to IPv4, the phone will use IPv4 address. IPv4 has three network modes: DHCP,
Static, and PPPoE

Configuring IPv4 using the phone interface

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port → IP
Port Mode
2. Press Left arrow or Right arrow key to change the IP Port Mode
3. Press OK or Save soft key to save the configuration
Copyright © 2019 Xorcom Ltd. All rights reserved Page 65 of 193