Configuring Ipv6 Using The Web Interface; Configuring Dhcp Using The Phone Interface; Configuring Static Ip Address Using The Phone Interface - Xorcom UC912G User Manual

UC912G IP Phone
2. Press Left arrow or Right arrow key to change the IP Port Mode
3. Press or Save soft key to save the configuration.

Configuring IPv6 using the web interface

1. Click Network→ Basic→ Internet Port
2. Select IPv6 for Internet Port
3. Click SaveSet for the setting.

Configuring DHCP using the phone interface

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port→
IPv6→ DHCP mode.
2. Click Save and restart the phone.

Configuring Static IP Address using the phone interface

1. Press Menu→ Settings→ Advanced Setting (password: admin) → Network→ WAN Port →
IPv6 → Static mode.
2. Enter the parameters: IP, IPV6 Prefix, Gateway, Pri. DNS (primary DNS), Sec. DNS (secondary
DNS) in the corresponding fields.
3. Click Save and restart the phone.
Copyright © 2019 Xorcom Ltd. All rights reserved Page 54 of 165