Assembly Instructions - Clarke KING150 Operation & Maintenance Instructions Manual

ASSEMBLY INSTRUCTIONS

1. Fit the handle first then the detergent tank, followed by the tool holder and
finally the hose hook to the hot washer as shown above using the 4 bolts
(for the handle) and screws (for the tool holder, hose hook) supplied.
SETUP
1. Press 'O' on the master switch to
make sure that the hot washer is
turned off.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
5