Related Manuals for Clarke King 140 Hotwasher
Summary of Contents for Clarke King 140 Hotwasher
- Page 1 Shown with optional Hose Reel OPERATING & MAINTENANCE INSTRUCTIONS 0704...
-
Page 2: Specifications
Dimensions ............. 640x480x760mm Please note that the details and specifications contained herein, are correct at the time of going to print. However, CLARKE International reserve the right to change specifications at any time without prior notice. Always consult the machine’s data plate... -
Page 3: Table Of Contents
Thank you for purchasing this CLARKE KING 140 Hot Washer. TROUBLE SHOOTING This machine is a lightweight, portable, high pressure power washer, designed for DIY and light commercial use ONLY It comprises an electric motor, a pump, a high pressure hose with a trigger... -
Page 4: Safety Precautions
5. Never operate the machine with any of the covers removed. 6. Do not, attempt any electrical or mechanical repair. If you have a problem with your machine contact your local dealer or Clarke Customer Services Dept., tel: 020 8988 7400 7. -
Page 5: Parts List
14. Disconnect from the mains supply before carrying out any PARTS LIST maintenance or servicing. Item Description Part No. 15. Never pull the washer by the power cable, or yank the cable it to disconnect from the socket. Keep the cable away from heat, oil or Fuel Tank MPVR87831 sharp edges. -
Page 6: Electrical Connections
It is recommended that the oil burner be serviced yearly, or as needed depending IMPORTANT: upon the machines’ usage. Please contact the CLARKE International Service Dept. If this appliance is fitted with a plug which is moulded onto the electric cable (i.e. -
Page 7: Assembly And Preparation For Use
Remover, which is a powerful low foaming lugs, and a rubber O-ring. Ensure the agent for car cleaning, patio cleaning etc., O-ring is in place and in good or CLARKE Wash & Wax, both available from condition. your CLARKE dealer. detergent lance... -
Page 8: Operation
Fig.4. OPERATION NOTE: A. COLD WASH The high pressure hose is secured to the handle by Fig.6. ON-OFF switch means of a latch shown in Fig.4. Make certain the PUMP ON/OFF switch To remove the hose, prise the latch down, to the mounted on right front of the unit, is set in position shown, and pull out the hose.
Need help?
Do you have a question about the King 140 Hotwasher and is the answer not in the manual?
Questions and answers