Unpacking And Assembly; Connecting The Wheels - Clarke Tiger 2600B Operation & Maintenance Instructions Manual

UNPACKING AND ASSEMBLY

Unpack your pressure washer and make sure that the following items are
present. Contact your CLARKE dealer immediately if any parts are missing or
damaged.
• 1 x Petrol Power Washer
• 2 x Wheel c/w Axle
• 1 x Upper Handle c/w fixings
• 1 x Hose Bracket c/w fixings
• 1 x Lance Bracket c/w fixings
• 1 x Primer Bottle
• 1 x Primer Bottle Bracket
• 1 x Hose
• 1 x Water Filter (may be
supplied already fitted)

CONNECTING THE WHEELS

1. Slide the axles into the locating
tube as shown.
• Make sure the ball catch locks
into the small hole on the
bottom of the locating tube.
2. Add the 2 axle covers as shown.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• 1 x Gun Assembly
• 1 x Lance / Nozzle Assembly
• 1 x Spark Plug Box Spanner
• 1 x Tommy bar
• 1 x Engine Manual
• 1 x Primer Bottle Holder
• 2 x Rubber feet and fixings
• 1 x 3m Inlet water hose
6