Table of Contents
Advertisement
UNPACKING AND ASSEMBLY
Unpack your pressure washer and make sure that the following items are
present. Contact your CLARKE dealer immediately if any parts are missing or
damaged.
• 1 x Petrol Power Washer
• 1 X Hose Bracket
• 1 X Gun / Lance Bracket
• 1 X Tap Adaptor (Fitted To Unit)
• 1 X Output Hose For Gun
• 1 x Gun Assembly
FITTING THE HOSE STORAGE BRACKET
1. Fit the hose storage bracket into
the position shown and secure
using the bolts, washers and nuts
supplied.
FITTING THE LANCE STORAGE BRACKET
1. Fit the lance storage bracket into
the position shown and secure
using the bolts, washers and nuts
supplied.
FITTING THE WATER BOTTLE
1. Fit the bracket to the frame as
shown using the bolts, nuts and
washers supplied.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• 1 x Lance Assembly
• 1 X Suction Hose
• 1 X Filter For Suction Hose
• 1 X Water Bottle
• 1 X Bottle Bracket
6
Advertisement
Table of Contents
