UNPACKING AND ASSEMBLY
Unpack your pressure washer and make sure that the following items are
present. Contact your CLARKE dealer immediately if any parts are missing or
damaged.
• 1 x Petrol Power Washer
• 2 x Wheel c/w Axle
• 1 x Upper Handle c/w fixings
• 1 x Hose Bracket c/w fixings
• 1 x Lance Bracket c/w fixings
• 1 x Primer Bottle
• 1 x Primer Bottle Bracket
• 1 x Hose
• 1 x Water Filter (may be
supplied already fitted)
CONNECTING THE WHEELS
1. Slide the axles into the locating
tube as shown.
• Make sure the ball catch locks
into the small hole on the
bottom of the locating tube.
2. Add the 2 axle covers as shown.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
• 1 x Gun Assembly
• 1 x Lance / Nozzle Assembly
• 1 x Spark Plug Box Spanner
• 1 x Tommy bar
• 1 x Engine Manual
• 1 x Primer Bottle Holder
• 2 x Rubber feet and fixings
• 1 x 3m Inlet water hose
6