Clarke KING150 Operation & Maintenance Instructions Manual page 15

the hot washer is
noisy.
Oil leaking from
the pump.
Motor suddenly
stops.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Air intake worn out / dirty/
blocked valves. Excess
water temperature.
Worn out o-rings or gaskets. Contact Clarke Service
Thermal protection has
activated due to
overheating.
Check air inlet. Contact Clarke
Service Department.
Reduce water temperature.
Department.
Switch off the hot washer and
wait until the unit has cooled
down sufficiently.
15