Intended Use; Exclusion Of Liability; Ec Conformity; Safety - Alpha-InnoTec SWP Series Operating Manual

Intended use

The device must only be used in accordance with its in-
tended application. This is:
•
for heating.
•
for domestic hot water preparation.
The device may only be operated within its technical pa-
rameters.
Overview "Technical Data/Scope of Supply".
NOTE.
Show operation of the heat pump or heat pump
system to the relevant power supply utility.

Exclusion of liability

The manufacturer is not liable for damage resulting from
improper use of the device.
The liability of the manufacturer is also invalidated:
•
if work has been carried out on the device and its
components divergent from the specifications of
these operating instructions.
•
if work has been carried out improperly on the
device and its components.
•
if work has been carried out on the device which
is not described in these operating instructions,
and this work has not been expressly authorised
in writing by the manufacturer.
•
if the device or components in the device have
been modified, converted or removed without
the express written approval of the manufacturer.

EC Conformity

The device bears the CE marking.
EC Declaration of Conformity.
4
Subject to change without notice | 83050900dUK – Translation into English of the original German operating manual | ait-deutschland GmbH

Safety

The device is safe to operate for its intended use. The
construction and design of the device correspond to the
prior art, as well as all relevant DIN/VDE regulations
and all relevant safety provisions.
Any person who carries out work on the device must
have read and understood the operating instructions be-
fore starting the work. This also applies if the person in
question has already worked with such a device or a sim-
ilar device or has been trained by the manufacturer.
Any person who carried out work on the device must
comply with the health and safety at work regulations lo-
cally applicable. This applies, in particular, in respect to
wearing personal protective clothing.
DANGER!
Danger of fatal injury due to electric
current!
Electrical connections may be installed
only by qualified electricians.
Before opening the unit, disconnect the
system from the power supply and secure
it from being switched back on!
WARNING!
Only qualified technicians (heating, refrig-
erating plant or coolant technicians and
electricians) may carry out work on the de-
vice and its components.
WARNING!
Observe the safety labels on and in the de-
vice.
WARNING!
Device contains coolant!
If coolant escapes due to a leakage, this
poses a threat to people and the environ-
ment. Therefore:
– Switch off system.
– Ensure installation room is well venti-
lated
– Inform the customer service author-
ised by the manufacturer.
ATTENTION.
For safety-relevant reasons:
Never disconnect the device from the power
supply, unless the device is opened.