Contact; Safety; Intended Use; Personnel Qualifications - Alpha-InnoTec SWC Series Operating Manual

1.4 Contact

Addresses for purchasing accessories, for service
cases or for answers to questions about the unit and
this operating manual can be found on the internet at
any time and is kept up-to-date:
● Germany: www.alpha-innotec.de
● EU: www.alpha-innotec.com
2

Safety

Only use the unit if it is in proper technical condition
and only use it as intended, safely and aware of the
hazards, and follow this operating manual.

2.1 Intended use

The unit is solely intended for the following functions:
● Heating
● Domestic water
accessories)
● Cooling (optional, with accessories or unit type
...K3)
► Proper use includes complying with the operating
conditions ( "Technical data / Scope of supply",
from page 26) and the operating manual and
noting and following the reference documents.
► When using the local regulations note: laws,
standards, guidelines, directives.
All other uses of the unit are not as intended.
2.2 Personnel qualifications
The operating manuals supplied with the product are
intended for all users of the product.
The operation of the product via the heating and he-
at pump control and work on the product which is in-
tended for end customers / operators is suitable for all
age groups of persons who are able to understand the
activities and the resulting consequences and can car-
ry out the necessary activities.
Children and adults who are not experienced in hand-
ling the product and do not understand the necessa-
ry activities and the resulting consequences must be
instructed and, if necessary, supervised by persons
experienced in handling the product and who are re-
sponsible for safety.
4
Subject to change without notice | 83056700gUK – Translation of the original operating manual | ait-deutschland GmbH
heating (optional, with
Children must not play with the product.
The product may only be opened by qualified personnel.
All instructional information in this operating manual is
solely directed at qualified, skilled personnel.
Only qualified, skilled personnel is able to carry out
the work on the unit safety and correctly. Interference
by unqualified personnel can cause life-threatening
injuries and damage to property.
► Ensure that the personnel is familiar with the local
regulations, especially those on safe and hazard-
aware working.
► Only allow qualified personnel with "electrical"
training to carry out work on the electrics and
electronics.
► Only allow qualified, skilled personnel to do any
other work on the system, e.g.
● Heating installer
● Plumbing installer
● Refrigeration system installer (maintenance
work)
During the warranty and guarantee period, service
work and repairs may only be carried out by personnel
authorised by the manufacturer.

2.3 Personal protective equipment

There is a risk of cutting your hands on sharp edges
of the unit.
► Wear cut-resistant
transport.
2.4 Residual risks
Electric shock
Components in the unit are live with life-threatening
voltage. Before opening the unit panelling:
► Disconnect unit from power supply.
► Protect unit against being switched back on again.
Existing earthing connections within housings or on
mounting plates must not be altered. If this should ne-
vertheless be necessary in the course of repair or as-
sembly work:
► Restore earthing connections to their original con-
dition after completion of the work.
protective gloves during