Faults; Scope Of Supply - Alpha-InnoTec SWP Series Operating Manual

Faults

In the event of a fault, you can read off the cause of the
fault via the diagnosis program of the heating and circulat-
ing pump control.
Operating instructions for the heat and heat
pump control.
WARNING!
Only customer service personnel author-
ised by the manufacturer may carry out
service and repair work on the compo-
nents of the device.
Subject to change without notice | 83050900dUK – Translation into English of the original German operating manual | ait-deutschland GmbH

Scope of supply

Typical scope of supply arrangement:
Compact device with fully-
hermetic compressor, all safety-
relevant components for cold
circuit monitoring, built-in heating
and heat pump control, sensors
mounted in the device for recording
the hot gas and hot water flow
and return temperature
What to do first:
Check the supplied product for signs of external
damage during delivery...
Check that nothing is missing from the scope of
supply...
Immediately submit a complaint in the event of de-
livery defects.
NOTE.
Note device type.
Overview "Technical Data/Scope of Supply" or
rating plate on the device.
7