1.4 Contact
Addresses for purchasing accessories, for service
cases or for answers to questions about the unit and
this operating manual can be found on the internet at
Germany: www.alpha-innotec.de
EU:
www.alpha-innotec.com
2
Safety
Only use the unit if it is in proper technical condition
and only use it as intended, safely and aware of the
hazards, and follow this operating manual.
2.1 Intended use
The unit is solely intended for the following functions:
Heating
Domestic water heating
Cooling (optional, with accessories or unit type
...K3M)
Proper use includes complying with the operating
conditions (
"Technical data / Scope of supply",
from page 28) and the operating manual and
noting and following the reference documents.
When using the local regulations note: laws,
standards, guidelines, directives.
All other uses of the unit are not as intended.
2.2
The operating manuals supplied with the product are
intended for all users of the product.
The operation of the product via the heating and he-
tended for end customers / operators is suitable for all
age groups of persons who are able to understand the
activities and the resulting consequences and can car-
ry out the necessary activities.
Children and adults who are not experienced in hand-
ling the product and do not understand the necessa-
ry activities and the resulting consequences must be
instructed and, if necessary, supervised by persons
experienced in handling the product and who are re-
sponsible for safety.
4
Subject to change without notice | 83056600eUK – Translation of the original operating manual | ait-deutschland GmbH
Children must not play with the product.
All instructional information in this operating manual is
injuries and damage to property.
Ensure that the personnel is familiar with the local
regulations, especially those on safe and hazard-
electronics.
Heating installer
Plumbing installer
Refrigeration system installer (maintenance
During the warranty and guarantee period, service
authorised by the manufacturer.
2.3 Personal protective equipment
of the unit.
Wear
cut-resistant
transport.
2.4
-
Components in the unit are live with life-threatening
voltage. Before opening the unit panelling:
Disconnect unit from power supply.
Existing earthing connections within housings or on
mounting plates must not be altered. If this should ne-
vertheless be necessary in the course of repair or as-
Restore earthing connections to their original con-
protective
gloves
during
Need help?
Do you have a question about the WZS Series and is the answer not in the manual?