Accessing The Menu - KERN 770-12 Operating Instructions Manual

770/GS/GJ-BA-defsi-0023

3.1.1 Accessing the Menu

- Press ON/OFF to turn off the balance
- Turn the balance back on. While all segments are
displayed, briefly hold down TARE.
- Release TARE when "1" is displayed.
- If "-" is displayed unlock the Balance Operating Menu:
remove the threaded cap located on the right next to the
AC jack.
- Press CAL until "8" appears.
- Press PRINT until the 2nd number of the code appears.
- Press CAL until "5" appears.
- Press PRINT until the 3rd number appears (when you
move to the third number, the previously set menu code
will appear).
- Press CAL to select "4".
- Confirming a Menu Code Setting
Press the TARE key to confirm the code you have just
set (this is indicated by the "o" after the code).
- To store the new menu code setting, press the TARE
key for more than 2 seconds !
91