Operating The Balance; Warm-Up Time; Turning The Balance On And Off (Standby Mode); Self-Test - KERN 770-12 Operating Instructions Manual

1.3

Operating the Balance

1.3.1 Warm-up Time

To deliver exact results, the balance must warm up for at
least 30 minutes after initial connection to AC power or after
a relatively long power outage. Only after this time will the
balance have reached the required operating temperature.

1.3.2 Turning the Balance On and Off (Standby Mode)

Press the ON/OFF key to turn the display on and off.

1.3.3 Self-Test

After the balance has been turned on, automatic self-test of
the balance's electronic circuitry is performed. At the end of
the self-test, a zero readout is displayed. This means that
the balance is ready to operate.
80 770/GS/GJ-BA-defsi-0023