Data Interface - KERN 770-12 Operating Instructions Manual

3.5

Data Interface

Balances of the KERN 770, GS and GJ series come standard with an interface. You
can plug a printer or a personal computer into this interface port. In addition, you can
choose to have data output from your balance to this on-line device either automatically
or by pressing a key.
The balance operating menu allows you to define the various parameters for data
output. For information on the data formats and for interfacing a computer or a different
peripheral device, see part 5 "Interface Description".
3.5.1 Data Output Parameter
Coupling with the stability parameter
Print on request = data output only by pressed key or software command
Auto print = continuous, automatic data output
Print on request regardless of stability
Print on request after stability, with storage of the function
Print on request at stability, without storage of the function
Auto print regardless of stability
Auto print at stability
3.5.2 Auto Print
The automatic data output can be stopped and started by simply pressing the PRINT
key. This function can be blocked in order to avoid operating errors or to ensure that the
data will be output continuously in the automatic mode.
Auto print stoppable by PRINT
Auto print not stoppable
* = factory setting
770/GS/GJ-BA-defsi-0023
Code
6 1 1
6 1 2*
6 1 3
6 1 4
6 1 5
Code
6 2 1
6 2 2*
97