Tare Parameter; Auto Zero Function; Adjusting And Linearisation Functions Using Cal - KERN 770-12 Operating Instructions Manual

3.2.4 Tare Parameter

You can define when the balance will perform the taring operation:
at any time
not until the readout is stable

3.2.5 Auto Zero Function

When this function is activated, any slight changes of the zero readout are automatically
tared.
Auto Zero on
Auto Zero off

3.2.6 Adjusting and Linearisation Functions Using CAL

external adjusting
internal adjusting for balance models with a built-in automatic
adjusting weight
external linearisation
adjusting functions blocked
* = factory setting; depends on the balance model in some cases
94
Code
1 5 1
1 5 2*
Code
1 6 1*
1 6 2
Code
1 9 1*
1 9 5
1 9 7
770/GS/GJ-BA-defsi-0023