Operating The Balance; Warm-Up Time; Power Display - KERN 1500-2M Operating Instruction

9 Operating the balance

9.1 Warm-up time

Optimum weighing results are being achieved when starting to operate the balance
only 5 minutes after turning the balance on.

9.2 Power display

If the symbol (*) is visible, the balance is provided with power via the mains adapter.
By pressing the ON/OFF key the balance is in the weighing mode.
Thus the power display in the balance display no longer is visible.
It is recommended to turn the mains adapter off after having terminated to work with
the balance.
Bar Graph display
The weighing range of the balance is separated in 20 graphic cuboids. If the balance
is not loaded, the zero (0) is displayed in the graphic display. If the balance is loaded
up to the half of its weighing range, 10 graphic cuboids are displayed.
Note:
If the tare weighing is carried out, the graphic weighing display continues to show the
quantity of cuboids of the tare weight.
EW-BA-defsi-0620 25