ADASH Ltd.
Instrument Operation
Switching on and off
The instrument is switched on by pressing of the middle button marked with
Provided that batteries with sufficient voltage are placed in the instrument then a display will show an
instrument Logo. If the batteries are weak the VIBRIO sign is bordered in red.
Fig. Switching on with
The instrument is switched off by pressing and holding the same button
the instrument switches of the sign POWER OFF... lights on the display, slowly goes out, and the
instrument switches off if you release the button.
Fig. Buttons / Switching the instrument on
Fig. Switching on with
weak batteries
21
Adash 4900 – Vibrio III
.
Instrument
on / off
button
Fig. Switching off
for a longer time. Before