Mircom FX-2000 Series User Manual page 20

Front Panel Menu Operation
Step 4: If the display shows...
No verified
devices
found.
If the display shows...
Loop 2 Address
005
Low Profile
ION Det
Maintenance Report
This option reports on all devices that are greater than 60% of alarm.
Step 1: Select Maintenance Report
- Reports
Menu -
3 Current
Levels
At this point the display will vary, depending on whether or not you have a printer connected.
• If a printer is not connected to the panel, skip to step 3.
• If a printer is connected to the panel, follow steps 2 and 3, below
Step 2: Print the Maintenance Report
- Report to -
1 Printer
2 Screen
Step 3: Select loop number
-Select Loop
Number -
Loop: _ _ _
17
...the display will return to the Reports Menu.
OR
•Press and hold INFO (
•Use and
records.
•Press CANCEL (
1. Use and
^
Report".
2. Press ENTER (
• To print the Maintenance Report to the printer, press
ENTER ( ) when the cursor flashes beside
"Printer".
•To print the Maintenance Report to the screen, press
then ENTER (
beside "Screen".
•Select a loop number by using
scroll through the numbers, or
•Select all loop numbers by pressing ENTER (
and waiting five seconds.
) to view the details.
to scroll the cursor through the
) to exit to the Reports Menu.
to scroll the cursor to "Maint
) to continue.
) when the cursor flashes
and to
)