Walk Test Menu - Mircom FX-2000 Series User Manual

3. Walk Test Menu

Use the Walk Test Menu when you want to test the devices in a system. Performing a walk test will
place the system in trouble (non-latching). The Walk test will be aborted if no circuit activations are
detected for one hour.
Notes:
•Walk test records that are printed to the screen will be stored in the event log.
•To print the walk test to a printer or to a laptop (using HyperTerminal), the printer output
must be enabled via the Configurator.
To enter the Walk Test Menu, you must be in the Command Menu. To enter the Command Menu,
press MENU ( ) when the display is in normal mode.
Step 1: Select the Walk Test Menu
- Command Menu
-
1 Reports
2 Bypass
Step 2: Enter your passcode (if required)
Enter
passcode for
level 1 or
higher:
Step 3: Select the option you would like to view
- Walktest -
1 Audible Test
2 Silent Test
The subsections below provide instructions on using each Walk Test Menu option.
1. Use and
2. Press ENTER (
Enter your passcode. See page 26 for instructions on
entering passcodes.
1. Use and
menu.
2. Press ENTER (
Press CANCEL ( ) to exit and return to the Walk
Test Menu. Repeat to exit to the Command Menu.
FX-2000 User Guide
to scroll the cursor to "Walktest".
) to select the Walk Test Menu.
to scroll the cursor through the
) to select an option.
22