Menu Mode - Mircom FX-2000 Series User Manual

Start Up

Menu Mode

Press the MENU (
Menu
1. Reports
2. Bypass
3. Walk Test
4. Change
Passcode
5. Day/night mode
6. Set time/date
7. Clear Event Log
8. Clear Verification
Counter
9. Auto Program
Note: If you have used the Configurator to program the "Enable Required" option in the
11
) button to activate the menu mode. The menu is broken down as follows:
Submenu
Alarm Log Print the Alarm Log.
Event Log Print the Event Log.
Current
Print the Current Levels.
Levels
Verif. Count Print the Verified Count.
Maint Report Print the Maintenance Report.
Device/
Bypass/unbypass a Device/Circuit.
Circuit
Loop Bypass/unbypass a Loop.
Relay disc Disconnect/reconnect all relays.
Audible Test Perform an audible walktest.
Silent Test Perform a silent walktest.
N/A Change all passcodes.
N/A Select day or night mode.
N/A Set the time and date.
Alarm Log Clear the Alarm Log.
Event Log Clear the Event Log.
All Logs Clear all the logs.
N/A Clear all verification counters.
Automatically programs the system
N/A
when a device is added or removed.
Command Menu, the Command Menu list will appear differently than that
which is shown above. Menu option three will read "Enable Required",
and "Walk Test" will move to menu option four. All subsequent menu
options will similarly be renumbered. For more information on the Enable
Required option, see page 25.
Description How to Use
See page 14.
See page 14.
See page 15.
See page 16.
See page 17.
See page 19.
See page 20.
See page 21.
See page 23.
See page 24.
See page 26.
See page 27.
See page 28.
See page 29.
See page 29.
See page 29.
See page 30.
See page 31.