Dhcp Server Screen - ZyXEL Communications LTE3301 Series User Manual

Figure 51 Network > DHCP Server > General
The following table describes the labels in this screen.
Table 33 Network > DHCP Server > General
LABEL DESCRIPTION
DHCP Server Select Enable to activate DHCP for LAN.
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows
individual clients (computers) to obtain TCP/IP configuration at startup from a server.
Enable the DHCP server unless your ISP instructs you to do otherwise. Select Disable
to stop the LTE3301 acting as a DHCP server. When configured as a server, the
LTE3301 provides TCP/IP configuration for the clients. If not, DHCP service is disabled
and you must have another DHCP server on your LAN, or else the computers must be
manually configured. When set as a server, fill in the following four fields.
IP Pool Starting This field specifies the first of the contiguous addresses in the IP address pool for LAN.
Address
Pool Size This field specifies the size, or count of the IP address pool for LAN.
DHCP Relay Select this option to have the LTE3301 forward DHCP requests to the DHCP server.
Chapter 9 DHCP Server
LTE3301 Series User's Guide
84