The Dynamic Dns Screen - ZyXEL Communications NVG2053 User Manual

Chapter 13 Dynamic DNS

13.3 The Dynamic DNS Screen

To change your NVG2053's DDNS, click Network > DDNS. The screen appears as
shown.
Figure 63 Network > DDNS
The following table describes the labels in this screen.
Table 47 Network > DDNS
LABEL
Enable DDNS
Service Provider
Domain Name
User Name/Email
Password/Key
IP Address Update
Policy
Apply
Cancel
146
DESCRIPTION
Select this check box to use dynamic DNS.
Select the name of your Dynamic DNS service provider.
Type the domain name assigned to your NVG2053 by your Dynamic
DNS provider.
Enter the user name you used to register for this service.
Enter the password you used to register for this service.
Select Use WAN IP Address to have the NVG2053 update the
domain name with the WAN interface's IP address.
Select Auto-Detect only when there are one or more NAT routers
between the NVG2053 and the DDNS server. This feature has the
DDNS server automatically detect and use the IP address of the
NAT router that has a public IP address.
Note: The DDNS server may not be able to detect the proper IP
address if there is an HTTP proxy server between the
NVG2053 and the DDNS server.
Select Use specified IP Address and enter the IP address if you
have a static IP address.
Click Apply to save your changes back to the NVG2053.
Click Cancel to begin configuring this screen afresh.
NVG2053 User's Guide