Time Zone - Landis+Gyr Gridstream RF Series IV Installation And User Manual

Landis+Gyr
4. Click Save to upload the file.
5. The Extender described in the IIF should now appear in Command Center. The Extender should
display the data entered for it and have the status 'Installed'.

Time Zone

In order to report readings time correctly, the Extender must be programmed with the appropriate
time zone. This is achieved by sending commands to the Extender that indicates the time zone in
which the endpoint is installed and whether Daylight Savings Time (DST) is observed in the given
time zone.
The meter installer should include the endpoint time zone in the Installation File. To make it easy for
installers to specify a time zone, the Time Zone List link will open a document that displays a list of
valid time zone designations by country.
1. From Command Center home, select Operations > Import > Import Installation File.
The Import Installation File window will open.
2. Click on the Time Zone List Link. The TimeZonesForInstallation window will open.
Installation and User Guide
Chapter 4 - Extender Configuration in Command Center
Figure 4 - 5. Import Installation File Window
98-1178 Rev AA 33