Locate Your Extender Using Radioshop; Using Etm - Landis+Gyr Gridstream RF Series IV Installation And User Manual

Chapter 3 - RadioShop and Endpoint Testing Manager (ETM)
1. Make sure your local radio is highlighted on the Nodes Pane.
2. Click Generate WAN Nodes Report.
3. From RadioShop home click Utilities > Radio > Discover Neighbors.
4. Once discovered, the Extender's LAN Address will show up on the Nodes pane.
5. Highlight the new Extender, and click Reports > Configuration > Radio to verify that you can
communicate with the Extender.

Locate your Extender using RadioShop

The Extender must be connected to power for configuration.
1. Click Generate WAN Nodes Report on the toolbar.
2. Right-Click your Local Radio and click Discover Neighbors.
3. Click your Extender's LAN ID.
4. Generate a Radio Configuration Report to make sure that you can communicate with your
Extender.

Using ETM

If someone could tell me what ETM is used for regarding this product, I can probably find the
appropriate content.
28
Figure 3 - 8. Discovering Neighbors
Figure 3 - 9. Extender Added to Nodes Pane
98-1178 Rev AA
Landis+Gyr
Installation and User Guide