Uploading Results To Apc - Black Box CertiFiber TS655A Manual

CERTIFIBER™
mode off. Unselect the Autotests by
pressing F2 (Unmark).
7. Press F1 (Delete) to delete all tests that
are currently marked.
8. A confirmation screen will prompt you.
Make the appropriate choice and
continue.
4.2.6 U
PLOADING
Test results can be uploaded to a PC using the
included ScanLink software. To do so, take
these steps:
1. Connect CertiFiber's serial port to the
serial port on your PC with the included
communications cable, as shown at right.
2. Turn CertiFiber on to
display the logo
screen.
3. Press Shift + Escape
to display the Setup
screen.
4. Highlight Upload to
PC and press F1
(Select). CertiFiber is
now in upload mode.
5. Run the ScanLink software.
6. Click on the software's Upload button (it
shows an arrow pointing from a
CertiFiber to a PC) to establish
communications between ScanLink and
CertiFiber. Autotests that are stored in
48
R
ESULTS TO A
PC
DB9 to DB9
Serial Cable
Com 1 or
Com 2