Table of Contents
Advertisement
CHAPTER 4: Operation: Automatic Measurements
4.2.5 D
ELETING
CertiFiber allows you to delete selected
Autotest results. To do so, take these steps:
1. Display the Results screen and use the
up- and down-arrow keys to highlight the
Autotest result you want to delete.
2. Press F2 (Mark) to mark the Autotest
name with a large arrow
on the right side, as
shown at right. The
highlight will
automatically advance to
the next line.
3. To manually select several
test results, press F2
(Mark) continuously until
all the Autotest names to
be deleted are marked
with arrows.
4. To automatically select several test results,
turn on block mode by pressing Shift +
F2 (Block). Each highlighted Autotest will
automatically be marked with the arrow.
5. Press Shift + down-arrow once to page
down and automatically mark each test in
the block. Pressing Shift + down-arrow
continuously will rapidly mark several
pages of Autotest names. Press Shift +
up-arrow to unmark a page of Autotest
names.
6. If tests were accidentally marked and
should not be deleted, press F2 (Block)
once more to turn the mark or block
R
ESULTS
47
Advertisement
Table of Contents
