Table of Contents
Advertisement
CERTIFIBER™
5. Press Escape to exit the Autotest Results
screen.
4.2.4 S
TORING
CertiFiber will store 1000 Autotest results.
1. To display the Results
screen, press F1 (Results)
from the logo screen.
The results screen will be
displayed with all stored
test results sorted by
reverse date, where the
oldest test is at the top of
the list.
2. To quickly move to the
last page of the list, use
the right-arrow key. Use the left-arrow
key to return to the first page.
3. To view detailed test results, use the up-
arrow or down-arrow keys to highlight
the appropriate item and press Enter.
The Results screen will be displayed with
the overall test result in the titlebar. The
type of Autotest used, the Circuit ID (Test
name), the loss for both wavelengths, the
length, the delay, the number of
connectors and splices, the overall test
number, and the time and date the test
was taken will be shown in the scrollable
screen.
4. Press Escape to return to the Results
screen.
46
R
ESULTS
Advertisement
Table of Contents
