Table of Contents
Advertisement
CHAPTER 4: Operation: Automatic Measurements
4.2.1 T
A
HE
The arrows at the top of the
screen indicate whether the
results are for a
test.
Two Way
The Autotest Results screen
displays the loss for each fiber
at 850 and 1300 nm. For
bidirectional measurements the
Worst case loss is displayed.
There is a ±0.25dB margin of error in
all PASS/FAIL indications.
Length and Propagation Delay
will be measured. The values
will then be compared against
the preprogrammed
PASS/FAIL limits and
CertiFiber will provide a
indication for both fibers.
The first page of the screen
displays the results for Fiber 1.
Use the right-arrow key to
highlight and display the
results for Fiber 2.
To save the highlighted
Autotest result, press
To view all results for the highlighted Autotest,
press
F2 (View)
R
UTOTEST
One Way
NOTE
.
S
ESULTS
CREEN
or a
.
F1 (Save)
41
Advertisement
Table of Contents
