Table of Contents
Advertisement
CERTIFIBER™
2.4 The CertiFiber Main Unit
CertiFiber's user interface has plenty of
graphical elements. It consists of an LCD
display, quick-access menus, arrow keys, and
descriptive menu options that simplify
certifying and troubleshooting fiber cabling
systems. Here's a quick introduction to the
keypad keys:
When turned ON, CertiFiber will display its
opening screen. To save battery power,
CertiFiber will turn off automatically after
10 minutes without activity.
Press Escape to return to the previous screen.
Press Power Meter to manually measure power
and loss at either the 850-nm or 1300-nm
wavelength. (Refer to
Press Autotest to measure cable length, to
measure power loss, and to obtain a PASS/FAIL
analysis against a selected standard. (Refer to
Section 4.2
14
ON/OFF
Escape
Power Meter
Autotest
.)
Section 5.1
.)
Advertisement
Table of Contents
