Table of Contents
Advertisement
CHAPTER 4: Operation: Automatic Measurements
CertiFiber's memory will be transferred
directly to the PC. Consult the ScanLink
Help file for further instructions for
uploading and storing test results.
Additionally, the collected data can be
easily transferred into the MT Crimp for
Windows database, where CertiFiber
Autotests can be viewed in detail,
managed, saved, printed, and distributed.
MT Crimp for Windows products are available
separately.
7. Turn CertiFiber off when the transfer is
completed.
4.2.7 P
RINTING
Uploaded Autotest results can be printed from
the PC to a printer. ScanLink or MT Crimp for
Windows can be used to save and print the
data. Consult the ScanLink Help file for
further information about printing test results.
4.2.8 S
AMPLE
The information on your Autotest printout
varies depending on the type of Autotest that
was used.
The name of the Autotest that was used to run
the test is displayed right below the company
name, and the report title.
The heading provides information on the
Circuit ID, the overall test result, etc. The
number of connections and splices used in the
link will only appear when the Autotest
performed was equation-based.
NOTE
T
R
EST
ESULTS
A
UTOTEST
C
ERTIFICATION
R
EPORT
49
Advertisement
Table of Contents
