Length Measurements; Meters Vs. Feet; Time/Date - Black Box CertiFiber TS655A Manual

3.2 Length Measurements: Meters vs. Feet
You can change CertiFiber's
length-measurement unit from
meters to feet and vice versa.
To do so, take these steps:
1. To display the Meters/Feet
setup screen, use the
down-arrow key to scroll
to Meters/Feet in the main
Setup screen and press
Enter or F1 (Select). The
display will show the
currently selected
measurement unit.
2. Press F2 to toggle the measurement
setting between meters and feet, or use
the up- or down-arrow keys to change the
measurement unit.
3. Press F1 (Save) to save the setting and
return to the main Setup screen.

3.3 Time/Date

You can set the date and time
of the CertiFiber's internal
clock. CertiFiber will maintain
these settings until either you
change them again or the unit's
battery is removed for more
than one hour. To set the date
and time, take these steps:
1. To display the Time/Date
setup screen, use the
down-arrow key to scroll
CHAPTER 3: Configuration
29