Table of Contents
Advertisement
CHAPTER 4: Operation: Automatic Measurements
4.2 Regular Autotesting
Using its completely automated Autotest
feature, CertiFiber runs cable
tests, checks test results against
standards, and displays a PASS/
FAIL indication.
An Autotest can be easily
customized to run the different
certification tests required for
your site or system.
Autotest supports many
different network types. The
tests and results vary
depending on the type of
network. (See the
Autotested Against
specification in
complete list of supported
network types.)
For certain Autotests, the
PASS/FAIL criteria need to be
customized in the Edit Autotest
screen. (Refer to
To run an Autotest, take
these steps:
1. Attach the cables to
CertiFiber and CertiFiber
Remote as shown at right.
Standards
Chapter 1
Section 3.1
for a
.)
37
Advertisement
Table of Contents
